- Additional information
Starline 44 Special Brass
Starline 44 Special Brass starts with consistent metallurgy, precise tooling, tight quality control, and 30 plus years of experience. 100% of Starline 44 Special brass guaranteed to have flash hole presence and to be of the correct length and diameter. Unlike some competitors, Starline’s brass is vertically drawn, effectively minimizing wall thickness variation.
Starline 44 Special brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application. See annealing procedure in Commonly Asked Questions, section #4.
When it comes to selecting the best in 44 Special brass, choose Starline for your reloading needs. If you’re needing projectiles, don’t forget to view our selection of pistol bullets. Since most pistol shooters look for a great low cost bullet, check out our selection of Berry’s Bullets. Also, we carry a large selection of once fired brass.
Caliber: 44 Special
Primer: Large, Unprimed
OAL: 1.145″ – 1.155″
* This is NOT loaded or primed ammunition *